3Com 5000/6000 Quick Reference Manual

Also see for 3C13701: Installation guide Installation guide Getting started guide Installation guide Module guide

Contents

obtaining help

3Com 5000/6000 Quick Reference Manual Manual pdf 1 page image

Copyright © 2006, 2007 3Com Corporation. All rights reserved.www.3Com.comPart Number: 10016467 Rev. AAPublished: October 20073COM R OUTER 5000/6000 F AMILYQUICK REFERENCE GUIDEOverviewThis Command Reference applies to the following Router 5000/6000 models running software version 3.0.About the Command Line InterfaceTo use and navigate the command line interface of your unit, please refer to the following points for assistance:■ When initially accessing the command line interface, press Enter when prompted. The User View menu for the unitdisplays. This is indicated by the chevron brackets around the name of the unit at the prompt, for example,

(where xx is either EI or SI).■ When in the System View menu, square brackets appear around the name of the unit at the prompt, for example,[router5000-xx].■ You must be in the System View menu to access the configurable CLI commands.■ Some commands can be entered directly at any prompt from anywhere in the interface.■ If you enter part of a command followed by a ? (with no space between), the CLI will show you all the commandsthat begin in that way.■ The term ‘view’ may be used interchangeably with the term ‘menu’.■ The undo command is placed before the command you wish to undo, for example, undo setauthentication password.■

places the cursor back to the start of the command line.

■ Enter the first few characters of a command and press TAB to enter the full command without having to input theentire command (where there is only one command that starts with the entered characters).■ Use the Up Arrow key at the prompt to repeat the previous command string.■ Use the Delete key to delete the character after the cursor; the Backspace key deletes the character before the cursor.■ When entering physical port numbers, Enter the port number as x/0/z, where x is the unit number and z is thephysical port number.Router 5012 (3C13701)Router 5232 (3C13751)Router 5642 (3C13755)Router 5682 (3C13701)Router 6040 (3C13840)Router 6080 (3C13880)