1About the Web InterfaceThis guide details the commands available on the Web and the Command Line Interfaces. Thetables contained in this document reference the CLI commands and the equivalent Web Interfacemenu items that allow the same configuration to be made via the web interface.About the Command Line InterfaceTo use and navigate the command line interface of your unit, please refer to the following pointsfor assistance:■ When initially accessing the command line interface, press Enter when prompted. The User Viewmenu for the unit displays. This is indicated by the chevron brackets around the name of the unitat the prompt, for example, <4500>.■ When in the System View menu, square brackets appear around the name of the unit at theprompt, for example, [4500].■ You must be in the System View menu to access the configurable CLI commands.■ Some commands can be entered directly at any prompt from anywhere in the interface.■ If you enter part of a command followed by a ? (with no space between), the CLI will show youall the commands that begin in that way.■ To display command parameters:At the prompt, enter the name of the command followed by a space and ?. For example:<4500>boot ?The following parameters are displayed:boot-loaderbootrom<4500>To specify boot loader, enter the command as follows:<4500>boot boot-loader ?You only need to enter ? if parameters exist for the command.■ To display parent menus:At the prompt, enter quit.■ To display the User View menu:Press .■ To obtain help:At the prompt, enter ?.■ The term ‘view’ may be used interchangeably with the term ‘menu’.3C OM® SUPERS TACK 3 S WITCH 4500Q UICK R EFERENCE G UIDE3COM OS VERSION 3.1.X