4ms Shaped Dual EnvVCA User Manual

4ms Shaped Dual EnvVCA User Manual Manual pdf 1 page image

Shaped Dual EnvVCA4ms CompanyUser Manual 1.0 – November 15, 2022The Shaped Dual EnvVCA is a dual analog envelope generator, waveshaper, slew limiter, and VCA.Each of the two channels is identical and they can be used separately or together.Shaped Dual EnvVCA features:• Versatile linear, exponential, and logarithmic envelope generator/LFO• Low-noise, low-distortion, DC-coupled linear VCAs• Shape slider, CV jack and attenuverters for fading between Exponential, Linear, and Logarithmicenvelope shapes without changing envelope timing• 100% analog• Sliders and range switches control Rise and Fall times from ~2ms (500Hz) to ~2 min.• Time CV jack extends time range: ~400μs (2.5kHz) to ~1 hour.• Independent attenuverters for Rise and Fall time• Blue/Red lights indicate strength and polarity• Cycle buttons for looping envelopes (LFO)• Trigger input jack and switch for toggling between AR, ASR, and Cycle modes of triggering• EOR/F (End of Rise/Fall) gate outputs can be used to chain and sequence events• Env Level and Offset knobs scale and shift ENV output without changing VCA volume• Audio In and Out jacks for passing audio or CV through the VCA• VCA CV inputs to use VCAs independently from the envelopes• VCA gain internally connected to envelope output when VCA CV jack is left unpatched• Follow input jacks allow for slew limiting, envelope following/sidechaining, ADSR, and exoticfiltering effects• Re-trig jumpers allow for re-triggering during rise phaseCycleARASRCycleARASRRise FallShaped Dual EnvVCATimeTimeFollowVCA CVVCA CVInAudio BAudio AOutInOut Lin 5VLin 5VORShapeRise FallSlowFastMedSlowFastTrig CycleOffsetLevelEOFFallRiseShape ShapeFollowENV A ENV BShapeFallRiseSlowFastMedSlowFastTrigCycleOffsetLevelEOR A