SAAF ™ PORTA-ScrubberInstallation, Operation, and Maintenance Instructions1.0 Introduction1.1 About This DocumentThis document contains the information necessary to properlyreceive, assemble, install, operate, and maintain the SAAF TMPORTA-Scrubber filtration system. The purchaser, installer, and/oroperator of the filtration system MUST read and comply with thisdocument in its entirety prior to installation of the equipment and itsoperation. Failure to comply with the requirements of this manualmay void the product warranty.CAUTION: These instructions are specific to the SAAF PORTA-Scrubber and SAAF Chemical Filtration Media. All ancillary tasksincluding, but not limited to, electrical and mechanical work,equipment handling, and safety procedures must be performed inaccordance with industry accepted practice and all relevant local,state, and federal government codes, laws, and policies.Better Air is Our Business®Table of Contents1.0 Introduction1.1 About this document1.2 Packaging and shipping, receiving and inspection,handling and storage1.3 Product descriptions1.4 Product model designations1.5 Product drawings1.6 Assembly – general comments1.7 Related system equipment2.0 Principles of Operation3.0 Installation Instructions3.1 Space requirements3.2 Foundations and anchoring3.3 Typical PORTA-Scrubber details3.4 General filter system installation3.5 Preparation for filter installation3.6 PolyKlean TM Blue filter installation3.7 Gas phase chemical media installation3.8 Cover latches3.9 Fans3.10 Standard Motors4.0 Start-up Instructions5.0 Maintenance5.1 PolyKlean Blue filter5.2 Gas phase chemical media monitoring5.3 Removal and replacement of particulate and gas phasechemical media5.4 Disposal of used filters5.5 Cover sealing gaskets5.6 General system maintenance6.0 Troubleshooting7.0 Spare Parts List8.0 Equipment Characteristics, Operating Weights, andShipping Weights