AAP AJ-765 Manual
  |
Operation & TestingRoutine Testing of smoke detectors should be done once a month.To test the AJ-765 smoke detectors press the test button for less than 1second. The sounder should activate.Any other linked detectors should also activate within 20 seconds.The smoke detectors sounder will automatically reset, when all the smokehas cleared.Hush feature. When the smoke detector has been activated, pressing thetest button for less than 1 second will silence that smoke detectors sounder.Indication:Green Flash every 60 seconds, Detector is performing correctlyRed Flash every 8 seconds plus beep, Faulty, Clean/Replacement requiredRed Flash every 50 seconds plus beep, Battery Low, Replacement requiredRed Flashing with No beeping, in Hush mode for 9 minutes*When using any aerosol smoke detector tester, please follow all instructions pro-vided on the can. Improper use may result in degraded detector performance.**Routine cleaning is required to ensure no false triggers.AJ-765Auto Resetting Smoke Detectorwith Wireless InterconnectSpecificationsDetection Type: Photoelectric ChamberPower Source: Battery up to 10 year lifeBuzzer Output: 85db @ 3 metersWireless Frequency: 433MHzInterconnect Range: up to 50 meters apartDimensions: 40mm x Ø110mmOperating Temp. Range: 0˚C to 40˚CCompatible with: AJ-718 Heat DetectorAJ-R106 Remote Test & Hush ControllerStandards: EN14604:2005/AC:2008& AS3786:2014KitchenDiningRoomLivingRoomBathroomBedroomBedroom BedroomBedroom= Must have Location (within 3 meters of every bedroom door)= Recommended Locations= Optional Heat Detector (AJ-718)500mm min.1500mm max.300mm min.300mm min.500mm max.ExposedBeams=Dead Air Space(don’t fit here)Mounting Clearances*Always refer to latest standards/building code for mounting locationsV1.01OP |
Related manuals for AAP AJ-765
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine