AARC Systems EVAC ARX43E52 Installation & Operation Manual
    |
aarcsystems.comAARC-EVAC Indoor StandaloneWireless Linked Message Player& Message Player/Repeater UnitsInstallation & Operation ManualThe AARC-EVAC Wireless Emergency and S.O.S. AssistMessage Player is a standalone system incorporating abackup battery system. The Message Player/Repeater is thesame as above plus incorporates a signal repeater.A wireless radio linked signal from a system Alert Panel or awireless Signal Repeater unit triggers standard emergencyalert sirens, a lockdown message and up to 7 unique S.O.S.assistance zoned messages.Audio outputs include standard emergency alert sirensincluding “Alert” and “Evacuation”. “Evacuation” also includesand if applicable a “Lockdown” message.“Alert” activation outputs the Australian Standard alert tone(complying to AS1670.4). Units can be ordered with 2 options:1) Alert will continue until cancelled.2) Unit can be factory set to sound for between 1–255seconds and if not cancelled before the set time, the unitwill automatically trigger the Evacuation Alert.“Evacuation” activation outputs the Australian Standardevacuation tone (complying to AS1670.4). To comply withAustralian Standards for evacuation tones, a custom messagemay be played after every third cycle providing evacuationinstructions to occupants. Voice message could besomething like “please evacuate the building by the closestexit and assemble at the designated assembly point”.If used, “Lockdown” activation outputs an audio custommessage to suit your application, chimes, tones, musictrack or voice message or any combination thereof.Up to 7 unique “S.O.S” zoned messages can also betriggered. (e.g. “[ding...dong] assistance to front desk” etc.)Multiple Alert Panel transmitters can be used within thesame “S.O.S.” zones, if required. Multiple messagemessage player units can be used within the same systemto increase the coverage area. A wireless “Cancel” activation(hidden button located on transmitters with “Lockdown”function) will stop any of the alerts and reset the system.Alternatively, Standalone Message Player units can alsobe used in conjunction with the rack mount PA Systemcovered by the PA System. (Note: An adequately-sized UPSis always recommended to power the PA system in case ofmains failure.)Components Supplied1 x ARX43E52Message Player UnitORRepeater Unit2 Speaker 3 Speaker1 x 15 VDC Power Supply2 x 15 Watt Speakers*1 x ARX43E52R Message Player/1 x AARC Antenna1 x ARX43E53Message Player UnitORRepeater Unit1 x 15 VDC Power Supply3 x 15 Watt Speakers*1 x ARX43E53R Message Player/1 x AARC Antenna1 x ARX43E54Message Player UnitORRepeater Unit1 x 15 VDC Power Supply4 x 15 Watt Speakers*1 x ARX43E54R Message Player/1 x AARC Antenna*A combination of Horn and Box Speakers as required.4 Speaker |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine