AARC TECHNOLOGIES Aarcantennas MKT20-V100 Installation Instructions Manual
  |
Specifications may change at any time without notice.www.aarcantennas.comInstallation InstructionsRefer to the Parts Table below to check the all mounting kits are includedserious physical damage on the parts to avoid any installationNotice:All the work on installation, maintenance, or removalqualified with experienced personnel.once a year to ensure the orientations and connections are work as normal.Caution:1. Do not install near the Power2. Do not install it in the wet-day, windy day, either lightning or thunder, do not use a metalladder at the same time.3. It strongly recommends when working on installation that wearing a pair of shoessoles and heels, protective clothing with a longMounting Hardware©Copyright AARC TECHNOLOGIESInstallation Instructionsbelow to check the all mounting kits are includedserious physical damage on the parts to avoid any installation failed.NO.1 Antenna pivot arm2 Bracket3 Bracket4 Mount clamp5 Calibration Tablets6 M12×17 M128 φ129 φ12 Sp10 M111 M10 Hex Nut12 φ1013 φ10 Sp14 M12×115 M16 M17 Φ818 Φ8 Spinstallation, maintenance, or removal to the antenna system isexperienced personnel. It recommends that keep a check on the Antenna Systemsonce a year to ensure the orientations and connections are work as normal.ower Lines or Guy Wires to prevent getting an electric shock.day, windy day, either lightning or thunder, do not use a metalwhen working on installation that wearing a pair of shoessoles and heels, protective clothing with a long-sleeve and rubber gloves.Mounting HardwareMKT20-V10012AUG2015TECHNOLOGIES CO., LTD., All Rights Reserved.below to check the all mounting kits are included; check if there is aName QtyAntenna pivot arm 2Bracket 1 1Bracket 2 1Mount clamp 4alibration Tablets 1M12×130 Bolt 4M12 Hex Nut 202 Flat Washer 16Spring Washer 16M10×25 Bolt 4M10 Hex Nut 40 Flat Washer 4Spring Washer 4M12×180 Bolt 4M8×35 Bolt 2M8 Hex Nut 4Flat Washer 2Spring Washer 2system is required byIt recommends that keep a check on the Antenna Systemsor Guy Wires to prevent getting an electric shock.day, windy day, either lightning or thunder, do not use a metalwhen working on installation that wearing a pair of shoes with rubber |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine