AAVARA PH640-NEW Installation Manual
  |
1. To ensure safety, please read this manual carefully before installation and follow the instructionsherein. Store this manual in a secure place for future reference.2. Keep this manual well for further reference.3. Use original parts only, any other unapproved components may result in the falling off of TV and thisbracket.4. Check all the parts as shown on the manual. If parts are missed or damaged, please keep it out of useand also return it to local retailer.5. After wall mount bracket was installed, please check the anchors and all fastening devices every 3months, and please dismantle the TV immediately and keep it out of use and also return it to localretailer if it gets loose, rusty or lost.6. The Mounting Bracket is intended for home use with the maximum weight indicated only, anyoverloading will lead to falling hazards.7. The Mounting Bracket is applicable for vertical, even solid masonries, concrete or brick wall only !, forother application, shall be evaluated by licensed construction specialist.8. Do not disassemble the product to repair by yourself. Warranty for electricity is void afterdisassembled!9. According to the illustrations, use cable binder or other similar clamper to fix the cable in order toprevent from unintentional shear risk and electric shock10. The manufacturer shall not be legally responsible for any equipment damage or personal injurycaused by incorrect installation or operation other than that covered in this manual.11. The Mounting Bracket is designed for easy installation and removal. The manufacturer shall not beliable for damage to equipment or personal injuries arising out of human factors or acts of God, suchas earthquake or typhoon.12. It is recommended that the projector Mounting Bracket installed by specialists.13. At least two persons are needed to install or remove the product to avoid hazards to person orproperty caused by falling objects.14. Please carefully inspect the area where the Mounting Bracket is to be installed:- Avoid places that are subject to high temperatures, humidity, or contact with water.- Do not install the product near air conditioning vents or areas with excess dust or fumes.- Only install on flat ceilings and avoid slanted surfaces.- Do not install in places subject to shocks or vibration.- Do not install in places subject to direct exposure to bright light, at it may cause eye fatigue whenviewing the display panel.15. Maintain sufficient space around the display to ensure adequate ventilation.16. To ensure a safe installation, first check the structure of the ceiling and select a secure mountinglocation.17. The ceiling should be strong enough to sustain a weight of at least four times the combined weight ofthe projector and mounting bracket. The mounting location must be able to withstand vibrations suchas from an earthquake.18. Do not modify any accessories or use broken parts. Contact your dealer with any questions.19. Tighten all screws (do not exert excessive force to avoid breaking screws or damaging their threads).20. This Mounting Bracket is meant to support the display only, do not hang anything else on it; especially,do not use it to support any person.21. Drill holes and screws will remain in the ceiling once the projector and Mounting Bracket are removed.Stains may occur on the ceiling after extended use.22. Since the ceiling type and the installation of the Mounting Bracket is beyond the control of the supplier,the warranty of this product is limited to the physical body of the Mounting Bracket for a period of 5years.23. Please consult the English language manual for any dispute on conditions.説当 専当 説 図当 毎 続 状 続当 説当 対 対 ・専当 気説 図 ・対 当来 ・対 当専 頼囲湿気撃観労気変断厳残残当 囲 囲説Projector Mount78PDH0100101BMin.400Max.634Ø600Ø56.5Ø50.8 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine