AB Quality PowerFlex 700S Quick Start Manual
                                |
Quick StartPowerFlex® 700S DriveIntroduction This document is designed to guide you through the basic steps needed toinstall, start-up and program the PowerFlex 700S Drive. The informationprovided does not replace the user manual and is intended for qualifiedpersonnel only. For detailed PowerFlex 700S information refer to thefollowing:Precautions Class 1 LED ProductGeneral PrecautionsTitle Publication Available...PowerFlex 700S User Manual 20D-UM001 www.theautomationbookstore.comPowerFlex 700S Reference Manual, Vol. 2 PFlex-RM-002PowerFlex 700S Firmware Release Notes 20D-RN004! ATTENTION: Hazard of permanent eye damage exists whenusing optical transmission equipment. This product emits intenselight and invisible radiation. Do not look into module ports orfiber optic cable connectors.! ATTENTION: This drive contains ESD (ElectrostaticDischarge) sensitive parts and assemblies. Static controlprecautions are required when installing, testing, servicing orrepairing this assembly. Component damage may result if ESDcontrol procedures are not followed. If you are not familiar withstatic control procedures, reference A-B publication 8000-4.5.2,“Guarding Against Electrostatic Damage” or any otherapplicable ESD protection handbook.! ATTENTION: An incorrectly applied or installed drive canresult in component damage or a reduction in product life.Wiring or application errors such as under sizing the motor,incorrect or inadequate AC supply, or excessive surrounding airtemperatures may result in malfunction of the system.! ATTENTION: Only qualified personnel familiar with thePowerFlex 700S Drive and associated machinery should plan orimplement the installation, start-up and subsequent maintenanceof the system. Failure to comply may result in personal injuryand/or equipment damage. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine