ABA 2909 Operation Instruction Manual
  |
2909 Retractable Operation InstructionParts explanationMulti-Application: A domestic LCD Television, Laptop, Projector….etc.Lock slot specification:1 Apply to 7mm x 3mm ~ >7mm x 3.6mm (as drawing to the right)2 An extra lock slot located in a side of lock cassette.NOTE: Please make sure the application slot is suitable for above mentioned lock slot specification in case of any damage caused.Locking steps.(1)Cable around the immovable article:Find out a lock hole (if not, find a flat area) -> press the button (1) + pull out the lockset (2). -> Before insert the end of application slot,the cable should be around the immovable article and cross through the fitting hole of lock cassette (3). (P. 1)(2)Unlocked modes:P.2 Push bottom protrudes the lock barrel is un-locked.P.3 Push bottom stays in the lock barrel is locked.P.4 If push bottom stays locked, before insert in the end of application slot, you need to:Holding the lock housing or lock buckle -> holding key handle -> insert key to the end and rotate the key to unlock the lockset-> pushbottom released (lock bottom jump out automatically.) -> Make a left turn -> withdraw key from the lockset-> unlock. (see P.2)IMPORTANT: when you try to release the push bottom if your hand do not hold the lock housing or lock buckle, the key will keepdoing idle-running in the lock barrel.CoversLock slotlocksetcassettebottomParts name of cassettePush bottomCableLock housing BuckleFoamLock boltConnectingParts name of lockset(2)(1) (3) Notebo okImmovable article such as table…etc.,P.1(2) insert key to theend and rotate P.4 (1) Holding thelock housing orlock buckleP.2. Unlocked modePush bottom protrudes thelock barrel in the meantime you couldlock anything which is having7mmx3mm~7mmx3.6mm lock slot.Push bottom has beenpushed down, no way topush in again.P.3. Locked modeConnecting up |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine