Short FormUsers ManualACS310SafetyTable of contentsMechanical installationElectrical installationStart-up and control with I/O

ABB ACS310 User's Manual And Safety Manual

Introduction

Fieldbus grounding

Drives with embedded fieldbus

Fieldbus modules for ABB drives

ABB cable TK505

AC500 COM1 – Master at the bus line end

AC500‐eCo COM2 – Master at the bus line end

Drive configuration

Starting up ACS310 drives with embedded Modbus RTU

Starting up ACS355 drives with FMBA‐01 Modbus RTU adapter

Starting up ACS800 drives with RMBA‐01 Modbus RTU adapter

Starting up ACS850, ACQ810 drives with embedded Modbus RTU

Starting up ACS880 drives with FSCA‐01 Modbus RTU adapter

Starting up ACSM1 drives with FSCA‐01 Modbus RTU adapter

Install drives library

Control Builder Plus for PLC and Drives

IP configuration of CPU (for Ethernet connection between PC and PLC)

CODESYS

Library Manager

PLC logic

Download program to PLC

Create boot project

Test the program

Read and write more data between PLC and drive (optional)

Visualizations

Add more drives (optional)

Actualization rate

ACS310

List of related manuals

Safety in installation and maintenance

Safe start-up and operation

Power connections and control interfaces

Type designation key

Installing

Checking the compatibility with IT (ungrounded) and corner grounded TN systems

Connecting the power cables

Connecting the control cables

Installation checklist

How to start up the drive

How to control the drive through the I/O interface

Terms and abbreviations

Default values with different macros

Actual signals in the short parameter view

Ratings

Power cable sizes and fuses

UL checklist

Product and service inquiries

1. Safety

Safety

General safety

What this chapter contains

Contents of this manual

Quick installation and commissioning flowchart

Product overview

Type designation label

Required tools

Unpacking

Fasten clamping plates

European union

Alternative power cable types

Additional US requirements

Relay cable

Control cable ducts

against thermal overload

Protecting the drive, motor cable and input power cable against thermal overload

Protecting the contacts of relay outputs

Motor and motor cable

Connection procedure

Default I/O connection diagram

Connecting the embedded fieldbus

Checking the installation

How to start up the drive without a control panel

How to perform a manual start-up

How to perform a guided start-up

Basic Control Panel

Overview

Operation

Output mode

Reference mode

Parameter mode

Copy mode

Basic Control Panel alarm codes

Assistant Control Panel

Parameters mode

Assistants mode

Changed Parameters mode

Fault Logger mode

Time and Date mode

Parameter Backup mode

I/O Settings mode

Summary of the I/O connections of the application macros

ABB Standard macro

wire macro

Alternate macro

Motor Potentiometer macro

Hand/Auto macro

PID Control macro

PFC Control macro

SPFC Control macro

User macros

Default order of the tasks

List of the tasks and the relevant drive parameters

Contents of the assistant displays

Local control

Diagnostics

Reference types and processing

Reference trimming

Example

Programmable digital inputs

DC Magnetizing

Critical Speeds

Custom U/f ratio

IR compensation

Motor Thermal Protection

Using residual current devices (RCD) with the drive

Basic control panel

Basic control panel alarm codes

Assistant control panel

Changed parameters mode

Fault logger mode

Time and date mode

Parameter backup mode

IO settings mode

ABB standard macro

Motor potentiometer macro

PID control macro

PFC control macro

SPFC control macro

AC500 Modbus macro

DC magnetizing

Motor heating function

Motor thermal protection