Instruction IN/ANAINST/032-EN Rev. BEndura AZ20 series probeCombustion oxygen monitorInstalling large surface area filterKit reference: AZ200 737Measurement made easy1 IntroductionThis publication details fitting of a large surface area filterto the AZ20 probe.These procedures must be carried out by suitably trainedpersonnel and in accordance with the information given.2 Tools / Items required— M4 open-ended spanner— 3 mm A/F hexagon wrench— Solvent (lighter fluid / petroleum ether) or alcohol(surgical spirits)— Non-metallic pan scouring pad— Scalpel / Small sharp blade— Small flat-bladed screwdriver— Transmitter Instruction manual IM/AZ20E-EN— Probe Instruction manual IM/AZ20P-EN— Maintenance guide IM/AZ20M-EN

ABB AZ200 737 Instructions Manual