—U S E R G U I D ECoreSense M10Multi-gas monitoring system

ABB CoreSense M10 User Manual

Symbol definitions

Personnel safety

Handling the analytical unit

INSTALLATION ON ENERGIZED TRANSFORMERS

Improper use

2 Introducing the CoreSense M10

Analytical unit

Analytical unit status LEDs

Touchscreen

Sensor head and communication cable

Sensor head status LEDs

Considering meteorological conditions

Siting the analytical unit

Siting the sensor head

Clearance requirements

Planning your cabling

Planning your communications

Gathering the installation tools

Precautions

Installing the shock absorbers

Placing the unit on the shock absorbers

Earthing the analytical unit

Connecting the sensor head

Purging the sensor head

Earthing the sensor head

Safety

Routing the sensor head conduit to the analytical unit

Connecting the gas lines

Connecting the internal communication cable

Removing the terminal block cover

Connecting the cable

Connecting the mains AC power cable

Powering up the CoreSense M10

Establishing RS-485 connections

Establishing analog 4–20 mA connections

Inputs

Installing relays

Establishing optical Ethernet connections

7 Configuring CoreSense M10

Establishing communications

Modifying default passwords

Setting the date and time

Activating the thermal pump

Closing the analytical unit door

Understanding cabinet LEDs

Understanding sensor head LEDs

Exporting the Events log

the SCADA port

Installing firmware updates

Updating with a USB key

Taking an oil sample

Electrical specifications

Environmental specifications

Laser

Communication

A Physical installation checklist

B Connector definitions

Power and relays

CoreSense M10