ABB FEPL-02 Quick Installation And Start-up Manual

Also see for FEPL-02 Ethernet POWERLINK: User manual Quick start guide

Contents

safety instructions

ABB FEPL-02 Quick Installation And Start-up Manual Manual pdf 1 page image

Options for ABB drives, converters and invertersQuick installation and start-up guideFEPL-02 Ethernet POWERLINK adapter moduleSafety instructionsWARNING! Obey the safety instructions. If you ignore them, injury or death, or damage to theequipment can occur. See the user’s manual.Mechanical installationElectrical installation Layout of the module1. Pull out the lock.2. Install the module carefully to an optionmodule slot of the drive. See the drivehardware manual.3. Push in the lock.4. Tighten the screw to torque 0.8 N·m usinga Torx TX10 screwdriver.WARNING! Do not use excessive force,or leave the screw too loose. Over-tightening can damage the screw ormodule. A loose screw decreases the EMCperformance, and can even cause an operationfailure.1 34No. Description1 Lock2 Mounting and grounding screw3 RJ-45 connector [X1]4 RJ-45 connector [X2]5 Diagnostic LEDs6 MAC ID532416

/ 2

Related manuals for ABB FEPL-02 Ethernet POWERLINK