Instructions4268151 ENElectrical Part-Turn ActuatorPME120-AI/-AN (Contrac)For continous control; rated torque 100 Nm;with integrated or for separate electronic unit

ABB PME120-AI Instructions Manual

Safety

Intended use

Design and function

EBN861

Overview

Device designs

Product identification

Transport and storage

Electronic unit EBN853 (Contrac)

Electronic unit EBN861 (Contrac)

Electrical connections

Conductor cross-section on electronic unit

Integrated electronic unit for PME120-AI / LME620-AI

Electronic unit EAN823 (Contrac) / EBN853 (Contrac EBN861 (Contrac)

Connection examples

Electrical data for inputs and outputs

Connection on the device

Connection of the power and signal cable on the actuator

Commissioning and operation

Commissioning and service field

Meaning of the LED indicators

Hardware settings

Manual (MAN)- and Automatic Operation (AUT)

Diagnosis / error messages

Error Diagram

Hardware Errors

Maintenance

Fuses

Recycling and disposal

Appendix

Contrac PME120AI

Warranty provisions

Name plates for the power electronic unit

Transport safety information

Installation safety information

Returning devices

Disposal

Modules

EAN823, EBN853

Factory default

Mounting

Connection of power / signal cables

Cable guide in universal plug

Terminal connection diagrams

EAN823, EBN853, EBN861

External fuse for EBN861

Operation following a continuous setpoint (standard)

Local operation

Operating elements of the service field (ISF)

Commissioning and service field (ISF)

Defining the initial position (0 % or 100 %)

Signals on the commissioning and service field (ISF)

Positions for the potential switch

Alarms / Errors

Alarm diagram

Error diagram

Trouble shooting

Specifications

Communication

PROFIBUS DP communication

Index

Device Identification

Important information

Assemblies

Lubrication

Electrical Connection

Integrated electronic unit (bus comunication)

Mechanical Contacts

Fuses at the actuator with integrated electronic unit

Setup

Adjustment using the configuration program

Functions and signals at the LCP

Replacing the position sensor

Troubleshooting

PME120-AN