CI/FEX300/FEX500-EN ProcessMaster, HygienicMasterFEX300, FEX500Commissioning InstructionElectromagnetic Flowmeter

ABB ProcessMaster Commissioning Instruction

Certificates

Safety

Device designs

Div. 2

Div. 1

Div.2

Overview: The fast track to the device data

Name plate

Name plate for model with integral mount design (single-compartment housing)

Name plate for model with remote mount design

Name plate for transmitter

Mounting

Rotating the transmitter housing

High temperature version

Electrical connection

Process sealing (Canada)

Ex relevant specifications for operation in Div. 1

Flowmeter sensor in Div. 1 and transmitter in Div. 2 or outside the hazardous area

Electrical data for operation in zones 1, 21, 22 / Div. 1

Devices with PROFIBUS PA or FOUNDATION fieldbus

Temperature data for operation in Zone 1 / Div. 1

Ex relevant specifications for operation in Div. 2

Electrical data for operation in zones 2, 21, 22 / Div. 2

Commissioning

Special features of the device design for operation in Div. 1

Changing the type of protection

Maintenance

Replacing the transmitter or sensor

Flowmeter sensor

Appendix

Installation drawing HART IDM-10-A0258

Installation drawing PROFIBUS PA / FOUNDATION Fieldbus IDM-10-A0266

E. County Line Road Warminster, PA

FEX300

Dransfelder Straße

Intended use

Plates and symbols

Transport safety information

Safety instructions for operation

Maintenance and inspection safety information

Integrated management system

Design and function

Design

Transport and storage

Transport of flanged units larger than DN 400

Mounting the measuring tube

Torque information

Variable process connections HygienicMaster

Information on EHEDG conformity

Installation Requirements

Installation in the vicinity of pumps

Rotating the display / Rotating the housing

Ground

Metal pipe with loose flanges

Plastic pipes, non-metallic pipes or pipes with insulating liner

Sensor type HygienicMaster

Installation and grounding in pipelines with cathodic corrosion protection (CCP)

Electrical connections

Cable with part number D173D031U01

Connecting the flowmeter sensor

Protection class IP 68

Connecting the transmitter

Transmitter

Devices with HART protocol

Devices with PROFIBUS PA or FOUNDATION Fieldbus

Connection examples for the peripherals

Configuring the current output

Commissioning PROFIBUS PA units

Example of local address setting (DIP switch 8 = On)

Unit behavior with auxiliary power switched on

System integration

Commissioning FOUNDATION FIELDBUS units

Position of DIP switches

Bus address settings

Commissioning the unit

Parameterizing via the "Easy Set-up" menu function

Flowmeter sizes, flow range

Parameterization

Menu levels

Process display

Switching to the information level (operator menu)

Switching to the configuration level (parameterization)

Hardware write protection

Selecting and changing parameters

Overview of parameters on the configuration level

Description of parameters

Menu: Device Info

Menu: Config. Device

Menu: Display

Menu: Input / Output

Menu: Process Alarm

Menü: Communication

Menu: Diagnostics

Menu: Totalizer

Alarm Simulation

Software history

Extended diagnostic functions

Sensor measurements

Trend

Checking the grounding

Recommended settings for diagnostic limit values

Limit values for the electrode deposits

Error messages

Error states and alarms

Function check

Operation outside of specifications (Off Spec)

Overview of error states and alarms

digital output

Error messages during commissioning

Gaskets

Downloading the system data

Spare parts list

Spare parts for remote design

Round field-mount housing

Performance specifications

Functional and technical properties - ProcessMaster

Material load

Functional and technical properties - HygienicMaster

Mechanical properties

FEX500

HygienicMaster

ProcessMaster