—RELION® PROTECTION AND CONTROL611/615/620 seriesEnd of Life InstructionsEnabling responsible recycling and disposal

ABB RELION 611 Series Manual

Relion 611 Series

This manual

Product documentation

Functions, codes and symbols

Overview

Indications

Premapped indications

CTRL.CBXCBR1 Circuit-breaker control (1)

LD0.EFHPTOC1 Non-directional earth-fault protection high stage (1)

LD0.LEDGGIO1 Indication LED states Color1/Color2

LD0.LEDGGIO1 Indication LED states OFF/ColorX

LD0.LEDPTRC1 Global conditioning (1)

LD0.LOFLPTUC1 Loss of load supervision (1)

LD0.MPTTR1 Thermal overload protection for motors (1)

LD0.PHIPTOC1 Three-phase non-directional overcurrent protection, instantaneous stage (1)

LD0.PREVPTOC1 Phase reversal protection (1)

LD0.TCSSCBR1 Trip circuit supervision (1)

LD0.XGGIO100 Physical I/O states (PSM card X100)

Unmapped indications

DR.RDRE1 Disturbance recorder signals

LD0.IL1TCTR1 Three-phase CT supervision (1)

Premapped registers

Control structure 3

Control structure 7

Fault record structure header

Fault record data

Indication bits mirrored in registers

SSR2 System status register (2) protection relay's mode and state

SSR4 System status register (4) data available 2 (client dependent, user-definable)

System register values

Time and reason for latest IED reset

User-definable bits [Alt.2], visible on 0x,1x,3x and 4x

LD0.CMMXU1 Phase current demand values (1)

LD0.CMMXU1 Three-phase current measurement (1)

Unmapped registers

CTRL.CBCSWI1 Circuit breaker control (1)

Section 3 Glossary

CTRL.CBCILO1 Circuit breaker enable signals (1)

LD0.MVGAPC1 Move (8 pcs) (1)

LD0.NSPTOV1 Negative-sequence overvoltage protection (1)

LD0.PHPTOV2 Three-phase overvoltage protection (2)

LD0.PHPTUV2 Three-phase undervoltage protection (2)

protection (1)

LD0.ROVPTOV2 Residual overvoltage protection (2)

LD0.TRPPTRC1 Master trip (1)

LD0.XAGGIO130 Physical I/O states (AIM card XA130)

LD0.RCHLCCH1 Ethernet supervision (1)

LD0.VMMXU2 Three-phase voltage measurement (2)

Control structure 1

Control structure 5

Device ID string

SSR1 System status register (1) device health

SSR5 System status register (5) device alive register

User-definable registers [Alt.1], visible on 3x and 4x

LD0.RESVMMXU1 Residual voltage measurement (1)

LD0.VMMXU1 Voltage demand values (1)

Relion 615 series

Relion 620 Series