Voltage RelayREU 610Operator's Manual - ANSI Version

ABB REU 610 Operator's Manual

REU 610

This manual

Product documentation

Use of the relay

Requirements

Protection functions

Outputs

Self-supervision

Time synchronization

Overvoltage protection

Undervoltage protection

Settings

Measurements

Protection

Triggering

Introduction

Document revisions

Safety information

Product overview

Operation

Display

Display modes

Main menu

HMI passwords

SPA password

How to select language

How to set the real-time clock

How to reset the trip lockout function

How to switch between front and rear connection

How to select the protocol for rear communication

HMI operation levels

How to monitor measured values

How to monitor recorded data

INFO menu group

Technical level

How to change settings

Configuration

indications, output contacts and memorized values

Protection relay indications

Yellow indicator LED

Programmable indicator LEDs

Disturbance recorder indication

Detachable plug-in unit

Detaching and installing the plug-in unit

Inserting and changing the battery

Commissioning and maintenance

Maintenance instructions

Preventive parts replacement

Digital input test

Testing residual voltage protection

Spare parts

Repair

Ordering information

Abbreviations

Intended audience

Application

Technical description

Non-volatile memory

Block diagram

Residual overvoltage protection

Circuit-breaker failure protection

Inverse definite minimum time characteristcs

Technical data on protection functions

Trip-circuit supervision

Trip lockout function

monitoring

Demand values

Disturbance recorder data

Control and target of disturbance recorder status

Settings and unloading

Communication ports

IEC 60870-5-103 remote communication protocol

Modbus remote communication protocol

Profile of Modbus REU 610

DNP 3.0 remote communication protocol

Protocol parameters of REU 610

DNP 3.0 device profile of REU 610

REU 610-specific DNP features

SPA bus communication protocol parameters

Event codes

Self-supervision (IRF) system

Relay parameterization

Serial communication connections

Technical data

Accessories

Check lists

Copyrights

Trip counters for circuit-breaker condition monitoring

Disturbance recorder

Control and indication of disturbance recorder status

Profile of Modbus

DNP 3.0 device profile

Specific DNP features