SACE Emax 2 - Tmax XTE1.2 - E2.2 - E4.2 - E6.2 - XT2 - XT4 - XT5 - XT7 - XT7MDoc. N.° 1SDH001000R0511 - ECN000095748 - Rev. CEkip supply - E1.2 - E2.2 - E4.2 - E6.2 - XT2 - XT4 - XT5 - XT7 - XT7MEkip Supply 24-48V DC Ekip Supply 110-240V AC/DCOKOK12XT7MXT2 XT4 XT5 12E2.2E4.2 E6.21222 112XT7

ABB SACE Emax 2 User Manual

SACE Emax 2

Emax E1.2 circuit-breakers

Warnings

Standards

Transport and checking on receipt

Identification of packaging

Storage method

Unpacking and handling

Weight of circuit-breakers without packaging

Description

Description of the circuit-breaker front panel

Description of electrical data plate UL

Manual operations for opening and closing the circuit breaker

Mechanical status indicators

Circuit breaker racking-in/racking-out operations

Mechanical position indicators

Environmental conditions

Altitude

Installation

Mounting the fixed part of the withdrawable circuit-breaker

Connection to the power circuit

Dimensions

Positioning anchor plates

Introduction to Ekip protection trip units

Protections

Integrated functions: Self-diagnosis, Test and Power Controller

Ekip Dip protection trip unit

LEDs

iTest pushbutton

S Protection

I Protection

G Protection

Neutral and frequency

Additional protections

Summary table of protections

Measurements

Test

List of alarms and signals

Summary table of LED signals

Ekip Dip: additional functions

Energy Store Time

Operating features

Default parameters

Accessories

Circuit-breaker dismantling operations

Circuit diagrams

Circuit-breaker terminal box

Electronic accessories

Connections

Ekip Link module

Signallings

Ekip Com Actuator module

Other accessories

Ekip Bluetooth module

Module Ekip Programming

Ekip Signalling 10K modules

Ekip Multimeter module

Electrical accessories

YU: undervoltage coil

YR: remote resetting coil

M: motor

Electrical signalling accessories

Aux 15Q: External additional open/closed auxiliary contacts

AUP: auxiliary position contacts

RTC: ready to close signalling contact

S51: trip unit tripping signalling contact

S33 M/2: springs charged signalling contact

Mechanical accessories

HTC / LTC: Terminal-covers

Mechanical safety accessories

PLP: padlock in connected/test/disconnected positions

SL: shutter lock

Mechanical Interlocks

Putting into service and maintenance

Wizard

Final check list

Identification of alarms or failures

Faults, causes and remedies

Faults signalled on the display

Maintenance

Circuit-breaker life

Maintenance operations

Disassembly operations

Cleaning and lubrication of the operating mechanism

Test with Ekip Connect

Decommissioning and treatment at end of life

Description of specifications plate UL

Introduction to Ekip protection releases

Ekip Dip protection release

Protections: thresholds

Protection S

Protection I

Protection G

Additional Ekip Dip functions

Wiring diagrams

YU: under-voltage coil

S51: release tripping signalling contact

S33 M/2: springs loaded signalling contact

Procedures for checking the accessories

Emax E2.2-E4.2-E6.2 circuit-breakers

Disposal of packing materials

Mounting the fixed part of the withdrawable circuit breaker

Reversal of the position of the vertical/horizontal terminals

Accessory modules

Neutral and Frequency

Contact wear

Opening command test

Ekip Touch protection release

Components of the interface

Diagnosis bar

Main

Alarm List

Histograms

Possible operations

Measuring instruments

Components of the menus

Protections Menu

Advanced menus

Settings Menu

Test Menu

Measurements Menu

Insertion of the password

Setting the parameters

Edit Parameters by option

Edit Parameters by value

Programming

Touch protections

L Protection

MCR Protection

IU Protection

Current thresholds

Protection T

Iinst

Summary table of Basic protections

Measuring Pro protections

Protection UV

Protection VU

Protection OF

Phase Sequence

Summary table of Measuring Pro protections

Hi-Touch protections

Protection S2

D Protection

Protection UV2

Protection UF2

Protection OF2

Harmonic Distortion

Additional Hi functions

Summary table of Hi-Touch protections

G Touch protections

Circuit breakers Emax E1.2-E2.2-E4.2-E6.2

Introduction to Ekip trip units

Accessorizing modules

Ekip Touch protection trip unit

Pages details

Summary table of basic protections

Availability (Performance)

External toroid protections

Self-diagnosis

Protections and Measurements

Programming errors

Functional characteristics

Disassembly operations for circuit breakers E1.2

Disassembly operations for circuit breakers E2.2-E4.2-E6.2

Ekip Com Profinet modules

Glossary

Safety

Regulations

Management operations

Ekip Dip

Operator interface

Additional functions

Rating Plug

First level maintenance

Second level maintenance

SACE Tmax XT