Installation InstructionABB Automation Products GmbHEppelheimer Str. 8269123 Heidelberg, GermanyPhone: +49 62 21 701 1444Fax: +49 62 21 701 1382E-Mail: plc.support@de.abb.comwww.abb.com/PLCSystem setupTake system out of the case and place upright.Connect the power adapter (13) to the wall socketand the cable plug to the power input socket (2).Connect the panel (12) power supply cable to theoutput socket (3). Connect an Ethernet cable (14)on one side on panel (12) Ethernet socket ETH0and the other side to the terminal base Ethernetsocket (11). After switching on the power switch(1), the system starts loading the PLC and thepanel program. The system is now ready to usethe demo program.Warning!This training case is a class A device for EMC,because the main components (e.g. PLC) insideare designed for industrial applications. It cancause radio-interference in residential areas.Warning!The operating temperature for training case is0 °C … + 40°CWarning!This training case must only be used with thedelivered power supply adapter. The use ofanother power supply is prohibited.Warning!This training case is only intended to be usedby skilled persons aware of the risks usingelectrical equipment and knowing the techni-cal rules, codes and relevant standards.Important!Please refer to the “Regulations concerning theSetting up of Installations” for safety instruc-tions. http://search-ext.abb.com/library/Download.aspx?DocumentID=3ADR025003*&Action=LaunchWarning!This training case is only intended to be used fordemonstration and training activities, and it mustnot be used for industrial applications.Features of demo programThe demo is ready for use when the CPU display isshowing „run“ and the panel screen shows „CP600-Pro Demo Project“. Touching „Training Case“ opensthe visualization of the input states of the I/O chan-nels. The input status on the screen changes whenpotentiometer (4) or switches (5) are operated. Thedemo program in the PLC reads inputs and copiesthe input state to outputs. On the I/O modules can beobserved that the status LED of outputs are followingthe input status. Touching the house symbol (upperright corner) closes the demo visualization. The otherbuttons on the panel screen open demos for featuresof the panel.Restoring demo programThe training case is delivered with demo programinstalled. If needed, the demo program can berestored from the SD card. The QR code opens theoperation instruction explaining configuration ofcomponents and procedure for loading the demoprogram into PLC and panel.TA515 CASE,TA5450 CASE7854610119312121413TA515 CASE TA5450 CASE1 24V DC Power switch2 24V DC Power input socket3 24V DC Power output socket4 2 Potentiometers5 8 Switches6 CPU PM583-ETH CPU PM5630-2ETH7 Analog/digital I/O module DA5018 Communication interfacemodule CI502-PNIO9 Communication module CM579-PNIO10 PROFINET connection11TB521-ETHEthernet PlugETH1 for PanelconnectionTB5620-2ETHEthernet PlugETH2 for Panelconnection12 Panel with power supply cable13 Power adapter14 Ethernet cables and SD card containingdemo program