ABBlighting V-Line Instruction Manual
  |
Add: 1501 Industrial Way North, Toms River, NJ 08755 Phone: 866-ABB-8866 E-mail: info@abblighting.comWeb: www.abblighting.com ©2015 ABBlighting, Inc. All rights reservedAdd: 1501 Industrial Way North, Toms River, NJ 08755 Phone: 866-ABB-8866 E-mail: info@abblighting.comWeb: www.abblighting.com ©2015 ABBlighting, Inc. All rights reservedLED V-LINE FLOOD LIGHTInstructions ManualWARRANTYLIMITED FIVE-YEAR WARRANTY. Should this product fail to perform satisfactorily due to a defect or poor workmanshipwithin five years from the date of purchase, return it to the place of purchase and it will be replaced, free of charge.Incidental or consequential damages are excluded from the warranty.Slip FitterPole1. Unsrew to install slip fitter first2. Rotate fixture to appropriateposition, and srew tightly. Fixturecan adjust 180˚3. Insert slip fitter to the pole1. Unsrew to install slip fitter first.2. Rotate fixture to appropriate position, and srew tightly. Fixture can adjust 180˚.3. Insert slip fitter to the pole.4For Universal Slip FitterLED V-LINE FLOOD LIGHTInstructions ManualSAFETY INSTRUCTIONMAINTENANCE CAUTIONSUITABLE FOR MODELWIRE CONNECTIONFOR 26W V-LINE FLOOD LIGHTUniversal voltage driver permits operation at 120V-277V,50/60HzFOR 38W V-LINE FLOOD LIGHT WITH DIMMERUniversal voltage driver permits operation at 120V-277V,50/60HzREAD CAREFULLY BEFORE INSTALLING FIXTURE. PLEASE KEEP THIS MANUAL FOR FUTURE USING.Fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper groundingis required for safety.THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICATION CODE BY A PERSONFAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.MAKE CERTAIN POWER OFF BEFORE INSTALLING OR MAINTAINING FIXTURE.CHECK THAT VOLTAGE IS COMPATIBLE WITH FIXTURE DRIVER, USE APPROVED CONNECTORS FORALL ELECTRICAL CONNECTIONS.1. Review the wire connection before beginning, and make sure fixture is grounded properly.2. For lighting controls, using functioning correctly.3. Turn power off and wait for fixture cooling to operate.4. Maintenance must be done by professionals.IMAGE MAY VARY FROM ACTUAL PRODUCT1 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine