ABC Office foil1200 Operating Instructions Manual
  |
1“When You Need More Than Staples.”Toll Free: 800-658-8788Fax: 801-927-3037info@abcoffice.comFoil Fuser / Roll Foiling MachineOperating Instructions1. Turn machine and roller on using the HEAT and RUN switches located on the right side of themachine (above power cord).2. Adjust the temperature on the HEAT knob located on the right side of the machine onapproximately 285ºF. The actual temperature will be reflected on the LCD read-out on top of themachine. Note – Do not be concerned if the temperature fluctuates some both before and duringfoiling, as this is normal.Warning – Do not set temperature above 350ºF.3. Load foil roll onto the front feed roller bar. Pull out knob located on the left side of machine torelease roller bar. Pull roller bar out. Slide a roll of foil onto the roller and replace roller bar. Pullapproximately 8 inches of foil from roller and feed through unit using a piece of card stock as aguide until the foil comes through the back of the unit. Make sure foil is fed under the bard beloweach roller, front and back.4. Slide an empty foil core on the rear take-up roller and tape foil to core with white or uncoloredside facing up. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine