ABL 1V0002 Quick Start Manual
Also see for 1V0002: Quick start guide
info@abl.dewww.ablmobility.deAlbert-Büttner-Straße 11D-91207 Lauf / PegnitzPhone +49 (0) 9123 188-0Fax +49 (0) 9123 188-188ABL SURSUMBayerische Elektrozubehör GmbH & Co. KG11V0002 EXTERNAL CONTROL UNITQuick Start Guide, current 03/2020, Article number: 0301673_E_bThank you for choosing the 1V0002 external control unit by ABL!• Please read this quick start guide carefully.• Please also consider the information and safety notices provided in the installation and operatingmanuals for the Wallboxes eMH2 and eMH3 by ABL.• Please visit www.ablmobility.de / Service / Downloads to download the detailed installation andoperating manuals.• Please affix the type plate included near the 1V0002 control unit as mandated.Components included1 x 1V0002 external control unitThe 1V0002 has four pre-drilled holes (∅ 7 mm) for mounting at the installation site. Fasteners (screws, wallplugs etc.) are not included with the 1V0002. These must be supplied by the installation contractor.Mechanical and electrical installationDuring the installation, the circuit breaker for the supply line must be switched off in the house distribution.Tools and materials required: Pozidriv screwdriver, wire stripper, crimping tool1 Attach the 1V0002 control unit using the DIN rail at the chosen installation site.2 Strip the wires of the supply line, put ferrules on the wires and crimp on the ferrules (tools: wire stripper, crimp tool)3 Operate the spring loaded mechanism of the PE terminal and clamp the PE protective earth conductor onto it.4 Insert the L and N conductors of the power supply cable into the RCCB terminals and screw down hand-tight(tool: Pozidriv screwdriver).Conductor colour* Connector RCCB DescriptionBrown L Phase 1 current-carrying conductorBlue N NeutralGreen-Yellow PE Protective earth* Colour-coding is not internationally standardised and may therefore varyThe electronic components of your wallbox will be damaged if a voltage above 250 V is applied between thecurrent-carrying conductor L and the neutral conductor N.This step concludes the installation of the 1V0002.All manuals and user guides at all-guides.com |
Related manuals for ABL 1V0002
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine