ABL electronic USB 2.0 Camera Microphone none User Manual
  |
USB2.0 CAMERA MICROPHONEUser's GuideInformation Before UsingInformation Before UsingPnP (Plug & Play) is only available in Windows 2000 and XPversions. Other operation systems (for example Novell and NT) donot support this function.To Avoid damage of the image sensor please do not point directlyinto the sun light Please keep the camera away from heat to avoidelectronic shocks.Please keep the camera away from rain or moisture, wipe thecamera lens with moistened soft cloth or neutral solvent.Please do not disassemble the camera as this will invalidate thewarranty. Misuse or abuse may cause electric shock and again willinvalidate the warranty .System RequirementSystem RequirementOperating EnvironmentOperating EnvironmentIntel ® Pentium 4 1.4G Hz,AMD Athlon® prcoessor (2.4G Hzprocessor recommended)128MB RAM (or minimum OS requirement whichever is higher)50MB available hard drive space16-bit colour display adaptor (thousands of colours)Windows ® compatible sound card (full dupiex sound cardrecommended)Microsoft ® Windows® 2000/XPCD-ROM DriveTemperature: 5 C - 40 C (41 F - 104 F)Relative humidity: 10% R.H. 80% R.HIllumination: 200 lux or morePackageCamera unit with USB cableCD-Rom containing driversUser's Guidecontact your dealer if anything listed above is missingTechnical SpecificationsTechnical SpecificationsDriver & Camera InstallationDriver & Camera InstallationApplication installationApplication installation1. Place the CD diskette into your CD-ROM drive (Please do notconnect the camera at this stage).2. The CD-driver will auto-run and then the installation menu willcome up on your screen (if it does not, please run the program"Install.exe" from the CD-ROM drive) The menu will show theinstallation buttons for the camera driver .3. Click the button "Install camera driver" to start installation.(Pleaserefer to Application software Installation)4. After finishing the installation, please reboot your computer torestart windows.5. Plug the camera into an available USB port on your PC or USBhub. Your computer will detect the new device "PC camera" andwill appear in the windows task bar . (You may need to restartyour computer again once this is completed.)6. This camera is applicable with microphone function, either viaUSB cable or via additional audio cable, if it is audio cable, pleaseplug it into the MIC-IN of your sound card.7. In some cases, while detecting new devices, Windows may askfor your original Windows-CD driver. Please follow the instructionsto insert your Windows-CD and run the program8. Once you have plugged in your camera, please open AMCAPwhich can be found by going into START and then selectingprograms.Sensor TypeResolutionInterfaceFrame RateFocusOS PlatformMicrophone SensitivityZoom300K CMOS sensor640* 480 pixels(Up to 1280 *1024 pixels)USB 2.030fps (CIF Mode); 30fps (VGA Mode)3cm to infinityWindows 2000 / XP-40db4XCheck Your DeviceCheck Your DevicePlease choice your device "Mic Cam 2.0" & "USB Audio",andPreview must be selected.Select this to install camera driverstep 1step 2step 3step 4step 5step 6Plug your camerainto USB portAudio function does not support on windows 2000 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine