ABLELink ®SE5002 Ethernet Serial ServerQuick Start GuideVersion 1.3Updated on 2008/02/29Tel: 886-3-5508137Fax: 886-3-5508131http://www.atop.com.tw

quick start guide

hardware description

software setup

pin assignments

ABLELink SE5002 Quick Start Manual

important announcement

fcc warning

I NTRODUCTION

Fig. 2. TCP Client Mode

Fig. 4. Tunneling Mode

Installation Procedures

Fig. 7. Static IP dialog window

Configuration by Telnet utility

Fig. 11. System configuring using Telnet

Fig. 12. Network configuring using Telnet

Fig. 14. Com1 setup

Fig. 15. Link Mode-TCP server setup

Fig. 16. Link Mode-TCP client setup

Fig. 18. Com port setting

Fig. 20. Setting packet delimiter timer

Fig. 22. login the system via Web

Fig. 24. Change the password

Configuring SE5002 as TCP server

Fig. 26. Com1 setup-TCP server

Fig. 27. Com1 setup-TCP client

Fig. 28. Com1 setup –pair connection

Fig. 29. Com 1 setup –UDP mode

Fig. 32. Data Transmission in a UDP Slave(server) Mode

Fig. 34. Assigning a new IP address with ARP command

Setup of a virtual COM driver

Fig. 37. Enabling Virtual COM port via Telnet

Configuring Virtual COM Ports

SNMP  
 ETUP

Fig. 42. NetworkView display the devices found

Preparing System

TCPTEST2 in Visual C

Using TCPTEST.EXE or TCPTEST2.EXE Sample Program

A.2. Software Specification

A.3.2.1 DB9 Pin Assignments

A.3.2.2 Terminal Block Pin Assignments

Note: Device will not be damage if the polarity is reverse

S YSTEM F IRMWARE

B.2 Critical Issues

ABLELink SE5002 Series

Introduction

Fig. 5. SE5002 Interfaces and DIN-Rail Mounting settings

Configuration by SerialManager

Fig. 8. SerialManager Auto IP Dialog Window

Appendix B: Upgrade System Firmware

Appendix C: Re-loading System Firmware

D.3. Functions


Contents quick start guide hardware description software setup pin assignments	ABLELink ®SE5002 Ethernet Serial ServerQuick Start GuideVersion 1.3Updated on 2008/02/29Tel: 886-3-5508137Fax: 886-3-5508131http://www.atop.com.tw Next / 4