ABRACON CORPORATION ABBTM-NVC-MDCS56 Manual
Bluetooth Module PbABRACON ISISO 9001 / QS 9000CERTIFIEDABRACON ISISO 9001:2008CERTIFIED30332 Esperanza, Rancho Santa Margarita, California 92688tel 949-546-8000 | fax 949-546-8001| www.abracon.comRevised: 08.14.13Visit www.abracon.com for Terms & Conditions of Sale| | | | | | | | | | | | | | |Moisture Sensitivity Level (MSL) – Level 3ABBTM-NVC-MDCS56 RoHS/RoHS II compliantPIN CONFIGURATION:Figure 1. Pinout (Topview)APPLICATIONS:FEATURES:• Automobile Hands free applications• High quality Stereo Headset• Bluetooth speakers• VoIP handsets• MP3 players• Bluetooth® v2.1+EDR Class2• +4dBm TX power, -86.0dBm RX sensitivity• Support Profiles: HFP, A2DP, AVRCP, SPP, iAP overBluetooth for Apple• UART/I2C master• 12 digital PIOs• Support PCM interface (SPDIF ,I2S)• Software Support Apt-X ,AAC, Apt-XLL,• SBC codec.• Wakeup interrupt and watchdog timer• 23.24mm x 11.93mm x 2.05mm• SMT pads for easy and reliable PCB mounting,• FCC ID: OC3BM1856*• QDID: B019582**Note: ABBTM-NVC-MDCS56 crosses to NovaComm P/N: NVC-MDCS56. BQB/FCC/CE certification documentation isunder P/N: NVC-MDCS56GENERAL DESCRIPTIONABBTM-NVC-MDCS56 is a class 2 Bluetooth® 2.1+EDR (Enhanced Data Rate) module, based on NovaComm’s proprietary technology. Ituses CSR’s BlueCore5-Multimedia. With internal DSP and audio codec, it is an ideal solution for integrating Bluetooth® audio functions intovarious products with minima efforts.With NovaComm’s iNova® stack, designers can easily customize their applications to support different Bluetooth profiles, such as HFP, A2DP,AVRCP, SPP. The module has a 16M bits flash to support different combinationof profiles.And with the built-in firmware, the module can also be connected with Apple’s Authentication Coprocessor to build an iAPover Bluetooth application. Please contact Abracon for more applications.Pin Symbol I/O Type Description1 GND Ground Ground2 RESETB CMOS input with weak internal pull-up Active LOW reset, input debounced somust be low for >5ms to cause a reset3 SPI_CLK input with weak internal pull-down Serial Peripheral interface clock forprogramming only4 SPI_MISO CMOS output, tri-state, with weak internal pull-down Serial Peripheral Interface output forprogramming only5 SPI_MOSI CMOS input, with weak internal pull-down Serial Peripheral Interface input forprogramming onlyPIN DESCRIPTION:23.24 x 11.93 x 2.05 mm SMTNote: MSL3 packaging applies to MOQ of (50) units. Devices sold in less than MOQ quantities will be provided in an ESD bag with Desiccant. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine