Absco IndustriesFortess Shed Model: 30081LK-PTXABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 30081LK-PTX 18/07/191PAGE 01ABSCO FORTRESS SHEDModel: 30081LK INSTRUCTIONAL VIDEOSABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 30081LK 11 May 2018G:\Product Management Files\2-Instructions (Source)\00-Absco - English\04-Fortress ShedTHIS PRODUCT IS DESIGNED FOR INSTALLATION ON, AND ANCHORING TO, A CONCRETE SLAB FOUNDATION.IT IS RECOMMENDED THAT THE CONCRETE SLAB IS AT LEAST 4” THICK.TO MINIMISE WATER INGRESS AT THE BASE OF THE STRUCTURE, A 1 3/16” HIGH REBATE IS RECOMMENDED FORTHE PERIMETER OF THE INSTALLATION AREA - REFER TO PAGE 16 FOR DETAILSNOTE THAT IF THIS REBATE IS PRESENT, THE FRONT AND REAR FRAMES WILL NEED TO BE CUT DOWN TO SUITNOTE: CUTTING FRAME SECTION RESULTS IN A MORE EFFICIENT AND NEATER FINISH TO THE FINAL STRUCTURE,AS OPPOSED TO CUTTING THE SHEETING/CLADDINGUNDULATIONS IN ANY FOUNDATION WILL LIKELY AFFECT THE ALIGNMENT OF SHEETING/CLADDING, TRIMSAND FRAME ASSEMBLIES - THE USE OF PACKERS, SHIMS, OR WEDGES IS RECOMMENDED WHERE NECESSARYIT IS RECOMMENDED THAT ENGINEERING SERVICES ARE ENGAGED FOR FURTHER OR ALTERNATEFOUNDATION SPECIFICATIONS9’ 9 13/16” WIDE2’ 6 7/16” DEEP7’ 10 1/2” HIGH