Absco Industries Assembly Instruction ManualABSCO EZISLIDER SHEDMODEL: 30082EK3.00mW x 0.78mD x 1.80mH, 1.95mHModel: 30082EK 22/11/18 1.11Download the AbscoSheds Assembly Appfor instructional videosMANU FA CT UREDIN A US TR ALIASNAPTiTEAssemb lyABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL SHED MODEL: 23151GK 21-11-2017CONCRETE SLAB2360mm1620mmFRONT: 2.26mSIDE: 1.52mHEIGHT: 1.95mWe thank you for choosing an Australian madeshed. For further assistance please visit our detailedinstructional video library atHttp://www.abscosheds.com.au/watch-videosAt ABSCO Industries we are always looking to benumber ONE, so please let us know what you thinkof our instructions. Feedback makes us better.feedback@absco.com.auCONCRETEREBATED EDGEBOTTOM CHANNELCONCRETE SLAB75mm WIDE REBATE100mmWHEN LAYING YOUR CONCRETESLAB, ENSURE THERE IS AREBATED EDGE 25mm DEEPAROUND THE PERIMETERTHIS WILL HELP WATER EGRESSFROM THE BASE OF THE SHEDAbsco IndustriesPremier Shed Model: 23151GKPAGEWhen laying concrete slab, ensure thereis a rebated edge 25mm deep around theperimeter. This will help water egress fromthe base of the shed.AU: 1800 029 701N Z: 0800 466 444admin@absco.com.auwww.abscosheds.com.auCONCRETE SLAB3100mm910mmCONCRETE SLAB: 3100mm X 910mm50mmREAR80mmFRONTCONCRETE SLABSHED BASE50mm50mmDoor opening: 1.44m W x 1.74m HRoof area: 3.00m x 0.90mBase area: 3.00m x .0.78m