Absco Industries Assembly Instruction ManualABSCO GARAGEMODEL: RG37601N23.7m W x 6.0m D x 3.2m HModel: RG37601N2 31/08/201AU: 1800 029 701NZ: 0800 466 444admin@absco.com.auwww.abscosheds.com.auFor construction in non-cyclonic areasWind rating: N2 as per AS4055-2012.If you require a higher wind rating please contactus: admin@absco.com.au or 1800 029 701*The frame must be secured to a concrete slabor footings, details of which are noted on theattached engineering drawings. Brackets forsecuring the frame to either a concrete slab orfootings are included in this kit. Anchors are notsupplied.Local authority approval must be obtained priorto construction. Once you have selected yoursite, draw a site plan and lodge your applicationtogether with a copy of the engineering planslocated at the back of these instructions.Opening width: 2400mmOpening height: 2300mmInternal wall height: 2830mmDOWNLOADOUR APP FORASSEMBLYVIDEOSLEAVE A REVIEWTell us about your experience andreceive a $20 Coles Gift Card.Visit www.abscosheds.com.au/reviewCONCRETE SLAB*