ACADIA LIVING Vintage L Installation Instructions Manual
  |
Lifetime Limited WarrantyAll Acadia Living shutters have a lifetime limited warranty and will be free from defects in materials orworkmanship for as long as the original retail purchaser owns the shutters, provided that such productswere properly installed in residential dwelling; and such products were made or assembled exclusivelyfrom original materials and components. Any resale or other transfer of the product and/or materialsvoids this warranty.For a complete copy of this warranty, please contact customer service by phone or email.Adjust the Tension SystemUse a clean dry cloth, feather duster or vacuum with brush attachment to gently remove dust anddebris. To ensure thorough cleaning, wipe the louvers in the open and closed positions.Do not immerse the product in water and do not use harsh chemicals to clean. This may causediscoloration and the wood to warp. Ultrasonic cleaning is not recommended. For best results onComposite Shutters, use a cotton cloth dampened with water. Polyester cloths tend to create static,which can attract dust.Maintain Your ShutterIf over a period of time the louvers on your shutters shouldloosen or not function properly, a built-in tension system can beadjusted. Simply open the panels fully and find the tensionadjuster screw hole on the side of each panel. Use a screwdriverto gently turn the screw on each side of the panel to your desiredresistance level. Repeat process for other panel(s) if necessary.TensionAdjusterCustomer ServicePhone: 855.667.6261Email: Blinds.comSupport@NormanUSA.comVersion 37103-65100IMPORTANT: Do not mix panels or frames from other windows. Install one shutter at a time.Getting StartedStep 1: Assemble FrameStep 2: Level the FrameStep 3: Secure the FrameStep 4: Attach the PanelsStep 5: Add the Finishing TouchInstallation OverviewGetting StartedRemove the shutter from the package. Do not discard any of the packaging material until theshutter operates to your satisfaction. Check the diagram below to make sure you have thenecessary parts.Hinge PinsFrameShutterPanelShutterPanelIMPORTANT: Check shutter operation and alignment before installing frame inserts, as frame insertscan NOT be removed once they are snapped into place.Match each frame insert with the corresponding side of the frame: Left to Left, Top to Top, Right toRight, Bottom to Bottom.Snap the frame inserts into place (OR remove double-sided foam tape and put the frame insert intoplace). This will cover screws and provide a finished look.Step 5: Add the Finishing TouchA rubber mallet can be used to help install frame inserts.!Hinge Pins Frame ScrewsHinge ScrewsHinge Screws for1" T-post with panelfolds include RTL(if applicable)Screws forT-post Connector(if applicable)63.5mm [2 1/2"]20mm [13/16"]18.5mm [3/4"]11mm [7/16"]Dovetail Key Hinge SpacersDouble-sided foam tape for wood frame only:Remove double-sided foam tape and put theframe insert into place.Snap!Frame InsertFrame InsertFrame InsertFrame InsertShutter Installation InstructionsVintage L Frame Outside Mount 4 SidesCONGRATULATIONS on purchasing the finest shutters in the market.You can take pride that your purchase will enhance the function and beauty of your home.Installation VideoScan the QR code withyour smartphone tofollow along with videoinstructions. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine