ACASIS EC-7252 Manual
  |
2.5 inch dual Disk Hard Disk Array BoxEnglish ManualForewordDear user, thank you for purchasing Acasis product. In order for you to have a betterunderstanding of the product, please read this manual carefully before use. I wish you apleasant experience!Package Contents2.5-inch dual-bay hard disk array*15V/4A power cord*1USB data cable*1Installation screw package*1User manual (including warranty card)*1Install screwdriver*1RAID settings*After setting up RAID, the hard disk will be formatted, pleasebackup data in advance1. EC-7252 has 4 RAID modes2. The factory default is JBOD mode3. You can use the dial on the device to adjust the RAID modeRAID0: The identified capacity is twice the capacity of thesmall hard drive in the two hard drives.Setting: Both dial codes are dialed to the digital positionExample: 1000GB+750GB=1500GBNote: If any hard disk fails, all data will be lostRAID1: only recognize one hard disk to store data, andback up to another hard disk at the same time.Setting: Dial number 1 to a number, dial number 2 to "ON"Example: 1000GB+750GB=750GBNote: If any hard disk fails, the data will not be lostJBOD: Recognized as two hard disks. (factory defaultsetting mode)Setting: Both dials are dialed to "ON" and the computerrecognizes them as two independent hard drivesSPAN: recognized as a hard disk, the capacity is the sum oftwo hard disksSetting: Dial 1 to "ON", Dial 2 to a numberExample: 1000GB+750GB=1750GBNOTE: The computer will recognize them as one largehard driveAll data will be deleted when setting RAID modes, please backup yourdata first! When connecting the enclosure to USB 2.0 interface of the computer, please usethe DC cable in the package for power supply . A single disk supports a maximum of 6TB. When using a brand new hard disk,it must be initialized and formatted to berecognizable. After setting up RAID mode, the hard disk must be formatted to be recognizable. The disassembled hard disk may cause path conflict, and you need to reassign theaccess path to identify it. Resetting RAID mode will cause the data to be cleared.Connect to computer (USB3.0, USB2.0)Connect to USB3.0 interface1. Use the USB3.0 cable in the package to connect to the USB interface of the PC2. When disconnecting, first eject the hard disk safely and then unplug the cable.Connect to USB2.0 interface1. Use the DC cable in the package to connect to the PC2. Use the USB3.0 cable in the package to connect to the USB interface of the PC3. When disconnecting, first eject the hard disk safely and then unplug the cable. |
Related manuals for ACASIS EC-7252
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine