120°The Accu-Chek Insight key frames consist of a cleaningtissue (A) and two applicators with black frames (B, C).White protective films cover the black frames. Theapplicators are necessary to place black frames aroundthe keys of the insulin pump. This avoids accidentaloperation of the pump. Read and follow the instructionsin the user’s manual that came with your Accu-ChekInsight insulin pump carefully.1• Check if a protective film is stuck on the pump. If aprotective film is stuck on, remove it.• Stop the pump before mounting the frames. From thestatus screen, press o. The main Menu appears.• Press z to move to Stop pump.• Press o to select. The Pump stopped screenappears. You can now disconnect the infusion setfrom your body and take off your pump.152• Hold the pump in an upright position. Turn the adapterwith the tubing anti-clockwise.• When you reach an angle of 120°, remove the adapterwith the cartridge. The pump starts rewinding thepiston rod. The battery remains in the batterycompartment.3• Read the safety instructions on the packaging of thecleaning tissue (A).• Wipe the front and the top of the pump thoroughlywith the cleaning tissue (A). Make sure to wipe thearea around the front and quick bolus keys.• Let the keys dry.4• Remove the white protective film from theapplicator (B).5• The applicator (B) has a symmetrical design. Hold theapplicator (B) above the front keys of the pump.• Place the applicator (B) on the front keys of the pump.If you feel the applicator (B) surrounding the frontkeys, the applicator (B) is positioned correctly.• Use 2 fingers to press the black frame of theapplicator (B) firmly onto the pump.6• Remove the applicator (B).7• Swipe with the finger over the black frame and pressit firmly all the way around.32467A Cleaning tissueB ApplicatorC ApplicatorKey FramesInstructions for useEBCATurn the page!