INSTRUCTION MANUALFor Model AI-IAQ-SP-IoTTable 1 – Basic hardware inputsSl.No Input/Points Placement in Instrument1 Temperature & Humidity Sensor Top Panel2 CO2 Sensor Top Panel3 GSM Antenna Top Panel4 USB Flash Drive Input Side Panel5 On/Off Power Switch Side Panel6 SIM Slot Side Panel7 Charging Point Side PanelTable 2 – Display Indication in Device ScreenSl.No Display in Screen Format1 Antenna Signal5 Signal Bar (when connected topower)2 Date DD/MM/YY3 Time HH:MM4 Battery Bar Indicator4 Bars [4 Bars- Full Battery, 1 Barblinking - Low Battery]5 Power IndicatorIndicates as 'P' (when connected topower)6 Temperature Indicator Indicates in Degree Celsius7 Humidity Indicator Indicates in RH [Relative Humidity]8 CO2 Indicator Indicates in PPM [parts per million]Table 3 – Basic operations of Front keysSl.No Button Function1 Enter1) Enter in Admin Setting Screen2) Saving Value2 Up1) Moving Up in Menu Items2) Changing values/digits3 Right1) Moving Down in Menu Items2) Moving to next value4 Exit Exit the Admin Setting Screen5 RECRecords the current values displayed in screen[Location, Date, Time, Temp, RH, CO26 SEND Sends the recorded values to ServerPage 1