1. Before your initial start-up, please unpack and carefully checkif there is any damage caused during transportation.2. Locate a suitable place for your device where there is good airflow.3. Check the surroundings and make sure there is no flammablematerials close to the unit as it can become very hot.4. The machine should be kept away from moisture.5 .When replacing parts, please use only genuine spare parts.6. Be sure the lid is tightly closed during operation.7. Do not connect the device to any dimmer pack.8. Always remember to unplug the unit from the power mainsbefore any service is done. There are no user serviceableparts inside. Service should be done by qualified personnelonly.9. Do not touch any wires during operation.CautionsTechnical SpecificationInnovative design with powerful beam, low heat and low powerconsumption, the LED Pin Spot is a perfect tool to replace thetraditional halogen pin spot.Advanced LED technology, long life span, no need to changethe lamp.LED PIN SPOTLED-900 ALED-900 A1