www.acti.comACTiKnowledge BaseCategory: Installation & Configuration NoteSub-category: Integration, ApplicationModel: KCM-3911Firmware: N/ASoftware: All Author: Ando.MeriteePublished: 2012/02/10 Reviewed: 2012/02/101How to Use KCM-3911 MD Preset Mode with NVR 2.3,3.0 and Standalone NVRContentsIntroductionUsing NVR 2.3Using NVR 3.0Using Standalone NVR 1.02.12Video ClipIntroductionOne of the most unique features of the hemispheric camera KCM-3911 is the Motion DetectionPreset mode. By this mode it is possible to let the camera capture and stream out only theregion that is currently activated by a moving object. As the object moves around the room, thecamera will be able to track the person by switching the view automatically according to thelocation of the moving object.The main benefit of such function is to have clear and enlarged overview of the intruders onthe NVR live display and save bandwidth and storage by only streaming a specific region of thewhole panorama view with much lower bitrate.ACTi NVR 2.3, 3.0 and Standalone NVR do not formally support Motion Detection PresetMode yet. However, this article provides useful tips that help you make this functionwork with all these VMS products today.The purpose of this article is to explain how to be able at least get live video on VMS screenwhile camera is working in Motion Detection preset mode.