ADT Galaxy 16+ Quick Reference Manual

Also see for Galaxy 16 Plus: User guide

ADT Galaxy 16+ Quick Reference Manual Manual pdf 1 page image

QUICK CONSUMERREFERENCE GUIDEYOUR System: Galaxy 16+ / 8+1Setting Your SystemStep 1When leaving your home ensure that all protected doors/windows, including yourfront door, are closed before setting your System.Step 2Enter your User Code and press the A key:• If all the System zones are closed when the setting routine is initiated the Keypadsounders will emit a continuous tone and the Keypad displays the Exit Timecountdown blocks.• If any zones are open (for example: protected doors or windows; or if someoneactivates a movement detector when the setting process is started) then theKeypad sounders pulse rapidly and the Keypad displays which zones are openClosing the open zones allows the setting routine to restart.Step 3Leave the building using the agreed Exit Route. Close and lock the Final Exit Doorand then, if fitted, operate the Exit Terminator; the horn outputs and the Keypadbuzzers become silent for four seconds, the countdown blocks all clear and theKeypad buzzers emit two long tones to confirm that the System is Set. On theKeypad the message System IS SET appears before the display goes blank. Thesetting routine can be aborted, before the System sets, by pressing the esc key onthe Keypad used to initiate the setting routine.