ADTRAN Bluesocket 2020 Series Quick Start Manual

Also see for Bluesocket 2020 Series: Quick start

Contents

quick start

ADTRAN Bluesocket 2020 Series Quick Start Manual Manual pdf 1 page image

Quick StartD ESCRIPTIONThe Bluesocket 2020 Series Access Point (BSAP) provides costeffective, high performance, reliable coverage in wireless environ-ments. These Access Points offer higher receive sensitivity onboth the 2.4 GHz and 5 GHz radios to compensate for mobiledevices that have a fraction of the transmit power of traditionallaptops.H ARDWAREThe following items are included in your shipment:■ Bluesocket 2020 Series Access Point■ One plastic wall/ceiling mounting bracket with hardware (twometal screw anchors, two long screws, and two short screws)■ One flush/recessed ceiling T-rail mounting hardware kit (fourT-rail clips [two sizes], two spacers, two long screws, and twoshort screws)Figure 1. Bluesocket 2020 Series Access PointAntennasThe BSAP provides one integrated, four element high-efficiencyPlanar Inverted F Antenna (PIFA) array with 3 dBi gain (noexternal antennas are required).g NOTEBefore mounting the BSAP to a wall or other surface, record the12-character MAC address and serial number listed on the backof the unit. This information will be required duringconfiguration.Ethernet12V DCLED’sThreadedMountingPointsOptional12 VDCPower portKensingtonSecuritySlotEthernetportOptional Equipment:The following equipment is optional and can be purchasedseparately:INSTALLATIONBefore installing the equipment, inspect the BSAP. If damage hasoccurred during shipping, file a claim with the carrier, and thencontact ADTRAN Customer Support. For more information, referto the warranty or to ADTRAN enhanced support for ProCare orProCare NBD purchased upgrades.Mounting the BSAP to a Ceiling or WallPosition the BSAP for maximum throughput and range betweenother APs and wireless client devices. Follow these instructions tomount the BSAP to an interior ceiling or wall using the enclosedceiling/wall mounting kit, as shown in Figure 2:1. Using the plastic mounting bracket as a template, mark thelocation to insert the screw anchors.2. Press the point of the screw anchors into the sheetrock atthe marks and drive them into the wall using a Phillips-headscrewdriver.3. Insert the long screws through the recessed holes in theplastic mounting bracket and drive them into the metalanchors.4. Drive the short screws into the threaded mounting points onthe bottom of the BSAP until they are firmly seated in thereceptacle. If extra space is required, use the spacers andlong screws provided with the T-rail mounting hardware kit toincrease the space between the unit and the mountingbracket. Leave enough of the long screws exposed abovethe spacer to ensure they can be inserted into the keyedslots on the mounting bracket.5. Mount the BSAP on the mounting bracket by inserting thescrews on the back of the BSAP into the keyed slots on themounting bracket and rotating the unit clockwise 90 degreesto secure it on the bracket.6. Optionally, protect your BSAP with a Kensington cable lock(not provided) inserted into the security slot.Description P/NExternal Power PoE Injector 1700923F1External DC Power Adapter 1700928F1Bluesocket2020 Series Access PointMarch 201961700945F1-13CP/N: 1700945F1