ADTRAN DDS T200 Installation And Maintenance Manual

ADTRAN DDS T200 Installation And Maintenance Manual Manual pdf 1 page image

61212008L1-5C 61212008L1-5C, Issue 3 1Section 61212008L1-5Issue 3, August 1999CLEI Code: NCM38CXBRADDS Type 200 Dual Slot HousingInstallation and MaintenanceContents1. GENERAL .................................................................. 12. PHYSICAL DESCRIPTION ...................................... 13. INSTALLATION ........................................................ 24. CONNECTIONS ......................................................... 35. SPECIFICATIONS ..................................................... 36. MAINTENANCE ....................................................... 47. WARRANTY AND CUSTOMER SERVICE ........... 4FiguresFigure 1. ADTRAN DDS T200 Dual Slot Housing ....... 1Figure 2. T200 Housing Terminal Barrier Block ........... 2Figure 3. T200 Housing Rear Panel ................................ 2Figure 4. Chassis Mounting Template ............................ 3TablesTable 1. Wiring Connections .......................................... 3Table 2. Telecommunication Configuration Codes ........ 3Table 3. Specification ..................................................... 41. GENERALThe ADTRAN DDS Type 200 Dual Slot Housing isused to house one or two standard T200 circuitpacks, and is capable of performing looptermination. Figure 1 is an illustration of the unit.Basic FeaturesThe basic features of the unit are listed below.• Standalone Type 200 housing• -48VDC power connections• Network connection through a terminalbarrier strip• Customer connects to RJ-48S or barrierstrip• Durable, hinged metal enclosure• Wraparound transparent front panel for easyLED viewingThe DDS T200 Dual Slot Housing is designed toaccept any standard Type 200 plug-in card. Fornon-loop powered units, the DDS T200 Dual SlotHousing can provide power to the circuit cardthrough an external power supply. The ADTRAN1353.DSK48V02 power supply can be used toprovide -48 VDC from standard 100-120 VAC topower these cards.The ADTRAN 1353.POWER08 supply can be usedto provide -48 VDC from standard 220 VAC. Thesepower supplies must be purchased separately. TheT200 Housing also provides network and customerinterface connections to the circuit card.Revision HistoryThis is the third release of this document. Thispractice has been reissued to includeTelecommunication Configuration Codes andmethods for locally powering the unit.2. PHYSICAL DESCRIPTIONFigure 1 illustrates the ADTRAN DDS T200 DualSlot Housing with the cover on. Connections aremade available by unscrewing the lock screw andlifting the hinged cover.Inside the housing are Euro-style connectors,illustrated in Figure 2, for connecting to thenetwork, to the CPE, and to an external powerFigure 1. ADTRAN DDS T200 Dual Slot HousingTOP SLOT - CIRCUIT 2BOTTOM SLOT - CIRCUIT 1TR DDS2PART NUMBER1212008Trademarks: Any brand names and product names included in this document aretrademarks, registered trademarks, or trade names of their respective holders.

/ 4

Related manuals for ADTRAN DDS T200