ADTRAN Express 3000 Quick Start Manual

Also see for Express 3000: User manual Configuration and troubleshooting guide

ADTRAN Express 3000 Quick Start Manual Manual pdf 1 page image

CONFIGURING AN ADTRAN EXPRESS 3000 WITH A NETGEAR FWG114PFIREWALL/ROUTERConfiguring the ADTRAN Express 30001. Connect the DB-25 Serial connection on the back of the ADTRAN Express 3000to a COM port on your PC with a serial cable.2. Connect the ISDN wall jack to the large RJ-45 ISDN jack on the far right of theback of the ADTRAN Express 3000 using the provided cable.3. Power on the ADTRAN Express 3000 by plugging in the power cord.4. From your PC, click on the “start” button, go to programs > accessories >communications > HyperTerminal. Click on HyperTerminal.5. In HyperTerminal, it may ask if you would like to make HyperTerminal yourdefault telnet client. Select “No”.6. You will then be prompted to give the connection a name. Name the connection“Express” and select “OK”.7. You will then be prompted with a “Connect To” window. Change the “Connectusing:” line to the COM port that the Express is connected (probably COM1).