Revision date: 19.12.20231Retrofitting the support brace for Aduro 22-3Difficulty level: IntermediateTime consumption: 20 minutesTools: Bit set, Bit screwdriverComponents: Retrofit-kit (Washers, screws, 30x30x320 U-Profile)To stiffen and make the Aduro 22-3 stove more rigid, a brace will be retrofit to it for models made beforeFebruary 2023. A brace consists of the following parts:Two braces will be needed for each stove, which is why they come in pairs.The brace will be fitted using some of the existing holes in the bottom plate of the stove:The brace will be installed, using the following steps:ScrewScrew

ADURO 22-3 Manual