2x 10 18Gb p s 4k60 (4:4:4) Distribution Amplifierac-da210-hdbtQuick Start GuideAVProEdge’s 2x10 HDBaseT Distribution Amplifier offers full 18Gbps distribution to multiple displaysusing the unit’s two HDMI outputs and eight HDBaseT outputs. This is ideal for bars, restaurants, digitalsignage, or anywhere you would like to watch one source on multiple displays. If distribution for morethan 10 displays is needed, multiple units can be daisy-chained together via the HDMI output ports. ThisQuick Start Guide will walk you through the installation and configuration of the AC-DA210-HDBT. Wewill cover:• Installation• EDID Management• Audio Extraction• IR ExtensionINSTALLATION1. Connect the HDMI input sources to the AC-DA210-HDBT.2. Connect the HDMI output devices to the AC-DA210-HDBT with an HDMI cable.3. Connect the HDBaseT Receivers to the HDBaseT Outputs using Category Cable (T568BTerminated Cat 6 UTP/STP Recommended). Compatible receivers from AVPro are the AC-EX70-UHD-R & AC-EX70-444-RNE.4. Power on the sources.5. Connect the power supply into the AC-DA210-HDBT.6. Turn on output devices/displays.7. You may now use the front panel button to switch the distribution amplifier’s input• RS232 Extension• USB Connection• Troubleshooting