Aaeon UP Quick Start Manual
  |
Quick Start Guidewww.up-board.org /www.up-shop.org / www.up-community.orgA single board computer with 40-pin GP-busto go with wide-range expansion modules.1x UP board1x active heatsink (attached)1x RTC battery (attached)You will need the following, not included:• 5V / 4A Power adapter and power cord• USB drive for OS installation• A monitor with HDMI• USB keyboard and mouse• Ethernet cable or WiFi (purchased separately)UP boardWhat’s in your kit?KeyboardMouseeeMonitorEthernetcableLocal router/network**Ethernet or WiFiDevelopment workstationConnect hardware2Prepare your bootable USB drive1a. Insert the USB drive before connecting the 5V / 4A DC adapter.b. Please connect HDMI before powering on the device. Upon receiving power, the board will turn on automatically.c. The board is set to automatically try to boot from the inserted USB drive.d. You do not need to make changes to the BIOS settings to install the operating system.For more info on the BIOS and how to change the BIOS password, see https://wiki.up-community.orgPlease refer to https://wiki.up-community.org/Setup for instructions on how to prepare the bootable USB drive. |
Related manuals for Aaeon UP
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine