Aaeon UP Squared 6000 Quick Start Manual

Also see for UP Squared 6000: Quick start guide

Aaeon UP Squared 6000 Quick Start Manual Manual pdf 1 page image

The UP Squared 6000 board comes withpre-attached passive heatsink andRTC battery.Quick Start GuideUP Squared 6000Up to a 1.7x improvement in single-thread performanceand up to 2x performance for 3D graphics compared toprevious generation Intel processors.I/O interfaces include 1x USB 3.2 Type-C (OTG support)*, 2x USB 3.2 Type-A, 2x GbE, 1x COM Port*, 1x SATA 3.0,1x M.2 2230 E key, 1x M.2 2242/2280 M key, 1x M.2 3042/3052 B key with micro-SIM card slot,1x HDMI 2.0b, 1x DP 1.2, 1x eDP* ,Audio jack line I/O, 1x 40pin HAT, 1x 100 pin header*,*Only in in Intel Atom® x6413E, Intel Atom® x6425RE SKUsWHAT 'S IN YOUR KIT ?1x RTC Battery (already attached)1x assive heatsink (already attached)1x UP Squared 6000You will need the following, not included:12V power adapter and power cord.A monitor with HDMI or DP, and respective cables.USB keyboard and mouse.Ethernet cable or WiFi module (optional, to be installed manually).USB drive for OS installation.GET READY CONNECT HARDWARE1. Insert the USB drive before connecting the 12V DC adapter.2. Please connect monitor before powering on the device. Upon receiving power, the board will turn on automatically.3. The board is set to automatically try to boot from the inserted USB drive.4. You do not need to make changes to the BIOS settings to install the operating system.For more info on the BIOS and how to change the BIOS password, see https://github.com/up-board/up-community/wikiAfter you finish installation for operating system, try together with Intel EDGE Software Hub, seehttps://www.intel.com/content/www/us/en/develop/documentation/edge-insights-vision-doc/get-started-guide.htmlCaution: This is a high performance system and may get hot during operation.HAT 40pin maximum current: 3mA.PC Client SKUs do not support 100pin expansion slot.HARDWARE SETUP DETAILS

/ 2

Related manuals for Aaeon UP Squared 6000