ViscoSense® interface box with DONGLEViscoSense® interface box with MICRO SD-CARDOperating instruction ViscoSense ® DONGLEA VAF ViscoSense® dongle is used for making the correct Interface box settings when a ViscoSense ®sensor is replaced. Please make sure that serial number on both the dongle and the new ViscoSense ®sensor are identical.For replacing the sensor we refer to our TIB-761 or TIB-769.Please note that the power supply must be connected to the interface box, when using the dongle.Please take necessary precautions to avoid personal injury.STEP 1Open interface boxSTEP 2Insert dongle in interface-boxSTEP 3Switch on dongle.The red LED is burning.STEP 4Wait until green LED starts blinking and switch offdongle.If green light does not start blinking, please repeatsteps 2-4STEP 5Close interface box and the system is ready for use.The dongle can be disposed according to local rulesafter use or returned to VAF Instruments BV.Publ. No. SIG-904-GB-0817Supersedes SIG-904-GB-8515