Aaronn Mpi4 Box Manual
  |
Aaronn Electronic GmbH, Lilienthalstrasse 1, 82178 Puchheim, Germany. All rights reserved. All specifications are subject to change without notice.Installation instructions1. The MPi4 Box and its components are sensitive to static electricity (ESD) and other damage. Therefore, be careful when handling and inspecting this productto ensure the integrity of the product at all times.2. Switch off the Public Display or the projector completely using the toggle switch, or disconnect the device completely from the mains before installing and wiring the MPi4 Box.3. The MPi4 Box starts automatically after switching on the Public Display.Installation steps for Sharp NEC displaysPOS 1 USB boot Boots from USB-CPOS 2 eMMC Boot(default)Boots from the internal eMMCFlashHorizontal mounting:Step 1: Remove existing screws Step 2: Fasten the mounting plate with the previouslyremoved screwsStep 3: Insert the MPI4 boxVertical mounting:Step 1: Existing screwsRemoveStep 2: Mounting plate with previously removedFastening the screwsStep 3: Insert the MPI4 boxTechnical specifications:Connections: 1x USB Type C (5V DC input)1x HDMI 2.02x USB 2.01x RJ45 10/100/1000 Mbps Ethernet1x RS232Features: Broadcom BCM2711quad-core Cortex-A72 (ARM v8) 64-bit @ 1.5GHz- 4GB RAM- 32GB EMMCPower: 5V DC @ typ. 1.5 A (full load)Operating temperature [°C] 0-50Dimensions (mm) 89 x 105 x 30Net weight (g) 248 gBoot Selection:Figure 1: Vertical mounting Figure 2: Horizontal mounting |
Related manuals for Aaronn Mpi4 Box
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine