Aastra Vista 200 Installation Manual

Contents

Aastra Vista 200 Installation Manual Manual pdf 1 page image

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •46 7985Installing Your Vista 200 PhoneWall MountWall MountConnect the receiver and receivercord .Attach the wedge-shaped base indesk mount or wall mount † position. Connect the line cord . Connect the power adaptor .Attach the language faceplate. Attach the receiver card and lens(shiny-side down).Attach the memory key card andlens (after saving numbers andnames in memory). The lens snapson and off so you can add numbers.When you have power:When you plug in your new phone, you may see a message on the display ask-ing you to make a language selection. Read the directions on the display toselect one of two languages.Vista 200 also runs a test to ensure that the phone cords are connected properly. Ifthe test fails, the display will prompt you to check the phone cords. Make sureall connections are fastened securely.Fit the Discovery Card on the phone. To find the OPTIONS key, slide the panel.31† For wall mounting, we recommendthat you use a wall mounting plate,which your local telephone companycan install. The excess line cord fitsinto the stand of the phone.Desk Mount21