Abe CS8106 User Manual
EnvironmentalfriendlyUser Manual1Table of Contents1. BT77AD profile and its functions..........................................31.1. Profile.................................................................................32 How to set up the BT77AD....................................................43. How to mount the BT77AD in the car ...................................44. LCD Display status ..............................................................64.1. On / Off and Pairing..............................................................64.2. Calling in.............................................................................84.3. Calling out..........................................................................94.4 On Line............................................................................... 104.5 Battery charging.................................................................125 . .................................................146. ...........................................................................147. ..............................................................158. ..........................................16Maintenance and Safe UseElectricalPackage ContentsFederal Interference Statement23LD77ABT 77ADLCD SOCKETLCD plugNote: BT77AD is an optional feature .Always avoid contact with humidity or heavy soiling.Any use other than the one described above will damage the product. Moreover,there is a danger, for example, short-circuits, fire, electric shock, etc. No part ofthe product must be modified or rebuilt and the housing must not be opened!Observe the safely instructions at all times!All company names and product designations contained herein are trademarks ofthe respective owners. All rights reserved.41. 77A profile and its functionsBT1.1. Profile(Fig.1)2Phone 1 icon Phone 2 icon 3 Mute icon4Battery icon16Metal Standwith 2-side tape5LCD plug(BT77AD )Fig. 152 How to set up the BT 77ADInsert fully the LCD plug into the LCD socket of BT 77AD before the Carkit is turnedon. (please refer to figure 2-3.)3.How to mount the BT77AD in the carUse the Alcohol Pad to clean the surface of a desired position on the top of thedashboard.●●●●Use the 2-side tape to attach the metal stand on the cleaned area.Put the BT77AD into an appropriate position(Refer to Fig.4)Slide the LCD to the metal stand.61.Attach the metal stand to the desiredposition.BT77AD2.Place the BT77AD on the sun visor.3.Slide the LD77A LCD display into themental stand.DashboardMetal StandBT77ADUNITWindshieldAirsuckersLD77A74. LCD Display statusWhen the LCD Display unit is properly connected to a Car Kit,it will provide youwith the status of the Car Kit’s operations. For detailed operations, pleaserefer to the appropriate user manuals.4.1. On / Off and PairingCar KitAfter the car kit has been poweredon, it will stay on idle. Before it isconnected to the mobile phone,theLCD screen displays “READY”.When the Car Kit is in pairing mode,the LCD screen displays “PAIRING”S1 S3 S3S4S1 S3 S3S48While the car kit is connecting to themobile phone, the LCD screen disp-lays “CONNECTING .”After the car kit has connected to themobile phone successfully, the LCDscreen displays “CONNECTED”.If you press the ON / OFF key for about5 seconds to turn off the car kit,the LCDscreen displays“OFF for a few secondsbefore it is completely off.”S1 S3 S3S4S1 S3 S3S4S1 S3 S3S4Fig. 2LCD Only( )Car Charger Only( )Fig. 3Fig. 4The backlight will be on automatically for 10 seconds when there is an incoming call orwhen any key operations are performed directly from the car kit.key operations are performed from the mobile phones.Note that the backlightwill not be turned on whenTMBluetooth Handsfree Car Kitwith LCD Display®CS8106(BT77AD)Abe/CS81064.2. Calling inWhen there is an incoming call, the LCDscreen displays “RINGING”, or its callerID, if it is received.Note: Some mobile phones may notdisplay Caller ID via this LCD Displayunit.When the call is answered, the LCDscreen displays“ON LINE”.If the call is rejected, it will go back toidle state and the LCD screen displays“CONNECTED”.Or Caller IDS1 S3 S3S4S1 S3 S3S4S1 S3 S3S4S1 S3 S3S4 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine