www.abelko.seIMSEUltraBase40Welcome to Ultra!All users of this product must carefully read the manual and takenecessary safety precautions.Safety instructionsIf the product is not used as intended its protection and safety functions maynot work.InstallationThe unit is to be mounted on a DIN rail in a locked cabinet. Installation iscarried out by a qualified electrician. Cables must be fastened and secured sothat no risk for injury or fire exists. Ventilation openings in the devise housingmay not be covered.A circuit breaker shall be installed close to the unit and its power supply.Function and position shall be clearly labelled. External voltage sourceconnected to DIGITAL OUT must be limited to a maximum of 0.5 A.The equipment must be unplugged from the mains and other possiblydangerous voltage sources during installation and service.Quick start guide

Abelko IMSE UltraBase40 Quick Start Manual