Abies TAS400 Series Operation Manual
        |
Revised Date: 2012/12/20 1TAS400 SeriesDigital Fan-coil ThermostatsOPERATION MANUALFront view Back view# Item Description1 LCD Display temperature and operation data.2 MODE button Access to user and engineer menu and for setting confirmation3 UP button Increase setting or next item4 DOWN button Decrease setting or previous item5 Power On/Off button Turn on/off thermostat6 FAN speed button Toggle to change Fan speed over Auto/Low/Med/Hi7 Fan icon Indicate Fan continuous on Auto enabled8 Hot spring icon or Flake icon Hot spring icon for Heating mode; Flake icon for Cooling mode9 Flow icon Flow icon for Ventilating mode10-1 Moon Sign Indicate unoccupied status10-2 Sun Sign Indicate control output ON11 Auto Automatic fan On-Off with outputs12-1 Outdoor icon Indicate door/ window open12-2 Clock 24-hour timer-Off set13 Sleep Sleep mode enabled14 Cover screw Screw to tighten back cover with front cover15 Back plate Plate for mounting on electric box16 Wiring terminal blocks Terminals for wiring17 Mounting holes Holes for mounting on electric boxInstallationMounting on electric box1. Separate back plate from the controller by loosing the cover screw;2. Align the mounting holes on the screw holes of the electric box(applicable to 65x65 or US standard box);3. Fix the back plate on the electric box by tightening the back plate screws. Suggest to use Philips wider “truss head” or“washer head” #6-32x 3/4”(20mm).4. DO NOT let the bolt head rise above the wall of mounting holes of back plate. It might cause the short circuit of thecontroller. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine