Able Planet BT400 Instruction Manual
  |
LOCATION OF PARTS AND CONTROLS1. Volume Up Button2. Play/Pause Button3. Volume Down Button4. Multi-function Button/LED5. Forward Button6. Backward Button7. Microphone8. DC Charging PortCHARGING HEADSET1. Plug one end of the included USB cable into the DC Charging Port on the Headset.2. Plug the other end into a USB port on your computer, or a USB AC adapter/5V 1A (not included)and connect to an electrical outlet.3. The LED will illuminate solid red while charging. The LED will shut off when fullycharged. The Headset takes approximately 3hours to charge from a completelydepleted battery.4. You have approximately 8 hours of use from a fully charged battery, depending upon thefunctions being used.POWERING HEADSET ON AND OFF1. Press the MULTI-FUNCTION BUTTON for 3 seconds. The LED will flash blue three times and youwill hear an ascending tone. The headset is now powered on.2. Press the MULTI-FUNCTION BUTTON between three to five seconds. The LED will flash red threetimes and you will hear a descending tone. The headset is now powered off.1237456LED STATUS CHARTPOWER ONPOWER OFFPAIRINGSTANDBY MODEAV ACTIVE MODEHEADSET ACTIVE MODELOW BATTERY INDICATIONAUTO SHUTDOWNCHARGINGCOMPLETE CHARGINGLED flashes blue 3 timesLED flashes red 3 timesLED flashes between blue and redLED is solid blueLED flashes blue twice every 2 secondsLED flashes blue once every 2 secondsLED flashes red once 2 sec continuousLED flashes red 3 times and powers off(5 minutes with no Bluetooth® connection)LED is solid redLED is offFoldable Bluetooth® HeadsetBT40014 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine